TP-Link TL-WA801N 300Mbps Wireless N Access Point

TP-Link TL-WA801N 300Mbps Wireless N Access Point

Wireless N – Speed ​​& Range

TP-Link TL-WA801N 300Mbps Wireless N Access Point

Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology,

it simultaneously works through two antennas to Tx and Rx to overcome the interference and signal degradation

when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance,

even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!

Multiple Operating Modes – Easy to Build WLAN

Supports multiple operation modes (Access Point, Multi-SSID, Client, Range Extender)

to enable various wireless applications to give users a more dynamic and comprehensive experience when using their APs.

Multiple operating modes also help you easily build wireless network for hard-to-wire locations or eliminate wireless dead zone.

Passive PoE Supported – More Flexible Deployment

The TL-WA801N is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away.

This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.

Wireless Performance

• Single-band 2.4 GHz (802.11b/g/n) with speeds up to 300 Mbps

• 2×2 MIMO technology boosting range and stability

• Receiver sensitivity:

  • 6 Mbps @ –90 dBm

  • 54 Mbps @ –77 dBm

  • HT20 @ –73 dBm, HT40 @ –70 dBm

• Transmit power: < 20 dBm (CE standards)

Flexible Modes & Features

Supports four versatile operation modes:

• Access Point – adds Wi‑Fi to wired networks

• Range Extender – boosts existing Wi‑Fi

• Client (Bridge) – connects wired devices to Wi‑Fi

• Multi‑SSID – up to four SSIDs with VLAN support

Other features: WMM QoS, radio on/off control, throughput monitoring, SNMP, captive portal

 Ports & PoE

• Ethernet: 1× 10/100 Mbps RJ45 port compatible with Passive PoE (injector included)

• Buttons: Power, WPS, Reset

• Power supply: 9 V ⎓ 0.6–0.85 A